HP storageworks director 2/140 Service Manual page 105

24
The product at the configured IP address is not an HP managed product. Notify
the customer of the problem.
1. At the HAFM main window, right-click the icon with the grey square
2. Choose Delete. A Warning dialog box displays, asking if the product is to be
3. Click Yes to delete the product.
Exit MAP.
25
Is the Embedded Web Server interface operational?
NO
↓
26
A Page cannot be found, Unable to locate the server,
HTTP 404-file not found, or other similar message displays. The
message indicates the Web browser PC cannot communicate with the director
because:
Continue to the next step.
27
Ensure the director reporting the problem is connected to facility AC power and
the power switch (circuit breaker) at the rear of the director is set to the ON (up)
position. Inspect the director for indications of being powered on, such as:
Director 2/140 Service Manual
representing the product reporting the problem. A menu displays.
deleted.
YES
The director-to-web server PC connection is restored and is
operational. Exit MAP.
The director-to-PC Internet (Ethernet) link could not be established.
AC power distribution in the director failed, or AC power was disconnected.
Both of the director's CTP cards failed.
At the front bezel, an illuminated power LED (green) or system error LED
(amber).
An illuminated green LED on the active CTP card, and illuminated green
PWR OK LEDs on both power supplies.
Diagnostics
105