Diagnostics
Maintenance Analysis Procedures
Note:
on your server and workstation. The title bars have been removed, and the fields may
contain data that does not match the data seen on your system.
Fault isolation and related service procedures are provided through MAPs. The
procedures vary depending on the diagnostic information provided. MAPs consist
of step-by-step procedures that prompt service personnel for information or
describe a specific action to be performed. MAPs provide information to interpret
system events, isolate a director failure to a single FRU, remove and replace the
failed FRU, and verify director operation.
Factory Defaults
Table 3
Table 3: Factory-set Defaults
Customer password
Maintenance password
IP address
Subnet mask
Gateway address
Quick Start
Table 4
MAP" on page 45.
Table 4: MAP Summary
MAP 0000: Start MAP
MAP 0100: Power Distribution Analysis
MAP 0200: POST Failure Analysis
34
HAFM and Element Manager screens in this manual may not match the screens
lists the defaults for the passwords and IP, subnet, and gateway addresses.
Item
lists the MAPs. Fault isolation normally begins at
MAP
Default
password
level-2
10.1.1.10
255.0.0.0
0.0.0.0
"MAP 0000: Start
Page
45
69
78
Director 2/140 Service Manual