B Technical Specifications; Factory Defaults; Factory-Set Defaults; Switch Factory-Default Values For Reset Configuration Option - HP StorageWorks Edge Switch 2/32 Installation Manual

B Technical specifications
This appendix contains the following information:
• Factory defaults, page 103
• Physical dimensions, page 105
• Environmental
• Power requirements, page 106
• Operating
• Laser information, page 107

Factory defaults

Table 4 lists the defaults for the passwords, and IP, subnet, and gateway addresses.
Table 4

Factory-set defaults

Item
User name
Customer password
Maintenance password
IP address
Subnet mask
Gateway address
Table 5 provides the Edge Switch factory-default values for Reset Configuration option.
Table 5

Switch factory-default values for reset configuration option

Configuration
Identification
specifications, page 105
tolerances, page 106
Default
Administrator
password
level-2
10.1.1.10
255.0.0.0
0.0.0.0
Description
Switch Name
Switch Description
Switch Contact
Switch Location
Default
NULL string
"Fibre Channel Switch"
"End User Contact (please
configure)"
"End User Contact (please
configure)"
Edge Switch 2/32 installation guide 103