Hafm Message Dialog Box - HP storageworks director 2/140 Service Manual

Diagnostics
At the HAFM master log, did the IP address below the director icon change to the
new entry and did the Ethernet connection recover?
NO
↓
Contact the next level of support. Exit MAP.
23
An incorrect product type is defined to the HAFM appliance.
1. At the HAFM main window, right-click the icon with the grey square and
2. Choose Delete. A Warning dialog box displays, as shown in
Figure 26: HAFM message dialog box
3. Click Yes to delete the director.
4. At the HAFM main window, choose Discover > Setup. The Discover Setup
5. Click Add. The Domain Information dialog box displays with the IP Address
6. Enter a description for the product in the Description field.
7. Enter the IP address in the IP Address field.
8. Enter the subnet mask associated with the IP address in the Subnet Mask
9. Click OK.
10. Click OK to close the Discover Setup dialog box.
At the HAFM master log, did the IP address below the director icon change to the
new entry and did the Ethernet connection recover?
NO
↓
104
YES
The director-to-HAFM appliance connection is restored and is
operational. Exit MAP.
yellow exclamation point (representing the product reporting the problem) at
the Physical Map. A menu displays.
dialog box displays, as shown in
page open, as shown in
field.
YES
The director-to-HAFM appliance connection is restored and is
operational. Exit MAP.
Figure 23.
Figure 25.
Figure 26.
Director 2/140 Service Manual