HP storageworks director 2/140 Service Manual page 314

Information and Error Messages
Table 32: Element Manager Messages (Continued)
The add firmware
process has been
aborted.
Switch clock alert
mode must be cleared
before enabling
period
synchronization.
The data collection
process failed.
The data collection
process has been
aborted.
The default zone must
be disabled to
configure.
The Ethernet link
dropped.
The firmware file is
corrupted.
The firmware version
already exists.
314
Message
You aborted the
process to add a
firmware version to the
HAFM appliance's
firmware library.
Clock alert mode is
enabled through the
Configure FICON
Management Server
dialog box and user is
attempting to enable
Periodic Date/Time
Synchronization
through the Configure
Date and Time dialog
box.
An error occurred
while performing the
data collection
procedure.
You aborted the data
collection procedure.
The message displays
when you attempted to
change the
management style to
Open Fabric and the
default zone is
enabled.
The Ethernet
connection between
the HAFM appliance
and the director is
down or unavailable.
A firmware version file
is corrupt.
This firmware version
already exists in
HAFM appliance's
firmware library.
Description
Verify the firmware addition is
to be aborted, then click OK to
continue.
Disable clock alert mode
through the Configure FICON
Management Server dialog
box.
Try the data collection
procedure again. If the
problem persists, contact the
next level of support.
Verify the data collection
procedure is to be aborted,
then click OK to continue.
Disable the default zone and
repeat the operation.
Establish and verify the network
connection.
Contact the next level of
support to report the problem.
Informational message
only—no action is required.
Action
Error Messages