®
R&S
SMM100A
7.3
Understanding the Display Information
The block diagram of the R&S SMM100A displays all main settings and generator
states, divided into three main operation areas.
Figure 7-1: Block diagram
1 = Status bar (frequency and level display)
2 = Block diagram
3 = Taskbar/softkey bar
●
Status
Bar....................................................................................................... 73
●
Block
Diagram.................................................................................................74
● Taskbar............................................................................................................75
●
Additional Display
7.3.1
Status Bar
The status bar at the top of the screen indicates the RF frequency and the level of
the output signal provided to the DUT. You can set both parameters directly here.
1 = Frequency display
2 = Status buttons
3 = Level display
Getting Started 1179.1335.02 ─ 02
Characteristics...................................................................76
Understanding the Display Information
Instrument Control
73