R&S AFQ100A
Gui Update - Setup System
The GUI Update window can be selected in the System section of the Setup menu.
The Start/Stop Gui Update window provides the possibility to switch off updating the displayed
parameters in order to increase speed for certain settings.
The indicated values are not updated and may therefore differ from their internally used values.
Remote-control command:
SYST:DISP:UPD OFF
Software / Options - Setup System
The Software/Options window can be selected in the System section of the Setup menu.
The Software/Options window shows the firmware version of the instrument software as well as all
installed hardware and software options.
Note:
Software options purchased at a later stage can be activated with a keycode. The activation code is
supplied with the software option. How to install options is described in chapter 4 of the service
manual.
The installation of hardware options purchased at a later stage is also described in chapter 4 of the
service manual. Most hardware options need to be installed at an authorized Rohde&Schwarz
service shop.
1401.3084.32
General Instrument Settings
4.86
E-3