Turn Signal Light Bulb Replacement; Tail Light/License Light Bulb Replacement; Neutral Switch - Honda NX250 Shop Manual

TURN SIGNAL/TAIL LIGHT BULB

TURN SIGNAL LIGHT BULB REPLACEMENT

Remove the turn signal lens attaching screw.
While pushing in, turn the bulb counterclockwise to remove.
Replace the bulb, if necessary.
Install in the reverse order of removal.
NOTE
• Seat the rubber gasket properly.

TAIL LIGHT/LICENSE LIGHT BULB REPLACEMENT

Remove the tail light lens attaching screws and lens.
While pushing in, turn the bulb counterclockwise to remove.
Replace the bulb, if necessary.
Install in the reverse order of removal.
NOTE
• Seat the rubber gasket properly.
Remove the license light cover mounting nuts and cover.
Remove the lens and bulb.
While pushing in, turn the bulb counterclockwise to remove.
Replace the bulb, if necessary.
Install the bulb and lens in the reverse order of removal.

NEUTRAL SWITCH

Remove the drive sprocket cover (page 8-2).
Check the neutral switch for continuity between the switch
terminal and ground.
There should be continuity when the transmission is in neutral.
There should be no continuity with the transmission in any
gear.
LIGHTS/METERS/SWITCHES
(1) SCREW
(1) NEUTRAL SWITCH
(2) BULB
19-5