Advertisement
3. STEERING HANDLEBAR
Fig. 4-15
@ Right handle grip
® Throttle grip pipe
® Lighting, dimmer and
ignition switch assembly
@ R. handle lever bracket
® Steering handle pipe
© Cable holder
@ Upper holder
L. handle lever bracket
@) Turn signal and horn
switch assembly
@ L. handle grip
@ Clutch lever
@ L. handle lever cover
@ Clutch cable
4 Under holder
@ Handle pipe cushion
Front stop switch
a Throttle cable
4) Front brake cable
Front braké lever
Disassembly
1. Disconnect the clutch cable at the clutch lever.
2. Free the brake cable from the brake lever.
3. Remove
the screws securing the turn signal and horn
switches to the handlebar; remove the switches.
4. Unscrew
the
screws
securing
the
ignition
switch
in
place. Remove the switch. Disconnect the throttle cable
from the throttle grip pipe.
Fig. 4-16
@ Brake lever
@® Brake cable
5. Remove the bolts and take out the upper handle holder
and steering handlebar.
Inspection
1. Check
the steering
handlebar
for twist or any other
damage.
2. Check each wiring for breakage or any other damage.
3. Check each cable for damage.
Fig. 4-17
51
Advertisement
