H3C s3100 series Command Manual page 1144

View
Port view
Parameters
shared: Sets the Web authentication access method on the port to shared.
designated: Sets the Web authentication access method on the port to designated.
Description
Use the web-authentication select command to enable Web authentication on the current port and set
the Web authentication access method on the port.
Use the undo web-authentication select command to disable Web authentication on the port.
There are two Web authentication access methods:
shared: In this mode, the port allows multiple Web authentication users to be online at the same
time.
designated: In this mode, the port allows only one Web authentication user to be online at a time.
This configuration takes effect only when Web authentication is enabled globally. If Web authentication
is not enabled globally, this configuration will only be saved.
Note:
You are not allowed to enable Web authentication on a port if:
The port isn't an access port, or,
The port belongs to an aggregation group.
Examples
# Enable Web authentication on Ethernet 1/0/1 and set the Web authentication access method to
shared.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] web-authentication select method shared
web-authentication timer idle-cut
Syntax
web-authentication timer idle-cut timer
undo web-authentication timer idle-cut
View
System view
1-10