H3C s3100 series Command Manual page 1142

Note:
You can set up to eight authentication-free users.
After a user gets online in shared access method, if you configure an authentication-free user
whose IP address and MAC address are the same as those of the online user, the online user will
be forced to get offline.
Examples
# Set the user with IP address 192.168.0.108 and MAC address 0010-0020-0030 as an
authentication-free user.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] web-authentication free-user ip 192.168.0.108 mac 0010-0020-0030
web-authentication max-connection
Syntax
web-authentication max-connection number
undo web-authentication max-connection
View
System view, port view
Parameters
number: Maximum number of online Web-authentication users on the port, in the range of 1 to 128.
Description
Use the web-authentication max-connection command to set the maximum number of online Web
authentication users on the device or on the current port. When this threshold is reached, no more users
can pass the Web authentication on the device or port.
If configured in port view, this command can be configured on only the ports that can service multiple
users at a time.
By default, a port allows up to 128 online Web-authentication users, and a device allows up to 512
online Web-authentication users.
Examples
# Configure Ethernet 1/0/1 to allow at most 100 online Web-authentication users.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] web-authentication select method shared
[Sysname-Ethernet1/0/1] web-authentication max-connection 100
1-8