Qos Cos - Dell PowerConnect 3424 Cli Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
The following example configures Ethernet port 1/e15 to the default trust state.
console(config)# interface ethernet 1/e15
console(config-if) qos trust

qos cos

The qos cos Interface Configuration (Ethernet, Port-channel) mode command defines the
default CoS value of a port. To return to the default configuration, use the no form of this
command.
Syntax
qos cos default-cos
no qos cos
• default-cos — Specifies the default CoS value of the port. (Range: 0 - 7)
Default Configuration
Default CoS value of a port is 0.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
• If the port is trusted, the default CoS value of the port is used to assign a CoS value to all
untagged packets entering the port.
Example
The following example configures port 1/e15 default CoS value to 3.
Console(config)# interface ethernet 1/e15
Console(config-if) qos cos 3
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
257
QoS Commands