The following table summarizes the equivalent CLI commands for configuring fields in the QoS
Settings page.
Table 9-94. CoS Setting CLI Commands
CLI Command
qos trust [cos | dscp]
no cos trust
The following is an example of the CLI commands:
Console (config)# cos trust dscp
Defining QoS Interface Settings
The Interface Cos/QoS Settings page contains fields for defining, per interface, if the selected
Trust mode is to be activated. The default priority for incoming untagged packets is also selected in
the Interface Cos/QoS Settings page, click Quality of Service
Interface Settings in the tree view.
Figure 9-131. Interface Cos/QoS Settings
Description
Configures the system to basic mode and the
"trust" state.
Returns to the non-trusted state.
CoS Global Parameters
Configuring Quality of Service
341