Show Environment (C-Series And E-Series) - Dell Force10 S4810P Reference Manual

Version 7.6.1.0
Version 7.5.1.0
E-Series
Example
FTOS#show debug
Generic IP:
FTOS#

show environment (C-Series and E-Series)

View the system component status (for example, temperature or voltage).
C-Series, E-Series
Syntax show environment [all | fan | linecard | linecard-voltage | PEM
| RPM | SFM]
Parameters
all
fan
linecard
linecard-voltage
PEM
RPM
SFM
Command Modes
150
Introduced on the S-Series.
Introduced on the C-Series
Original command.
IP packet debugging is on for
ManagementEthernet 0/0
Port-channel 1-2
Port-channel 5
GigabitEthernet 4/0-3,5-6,10-11,20
GigabitEthernet 5/0-1,5-6,10-11,15,17,19,21
ICMP packet debugging is on for
GigabitEthernet 5/0,2,4,6,8,10,12,14,16
Enter the keyword all to view all components.
Enter the keyword fan to view information on the fans. The output of
this command is chassis dependent.
Refer to the Examples for the show chassis, show command-
history, and show cpu-traffic-stats commands for a
comparison of output.
Enter the keyword linecard to view only information on line cards.
Enter the keyword linecard-voltage to view line card voltage
information.
Enter the keyword pem to view only information on power entry
modules.
Enter the keyword rpm to view only information on RPMs.
Enter the keyword sfm to view only information on SFMs.
• EXEC
• EXEC Privildge
NOTE: This option is supported on the E-Series only.