Show Environment - Dell PowerEdge M I/O Aggregator Reference Manual

Command
History

show environment

Syntax
Parameters
Command Modes
Command
History
Example
Example
54 | Control and Monitoring
Version 8.3.17.0 Supported on M I/O Aggregator
Displays the system component status (for example, temperature, voltage).
show environment [ all | stack-unit unit-id ]
all
stack-unit unit-id
thermal sensor
EXEC
EXEC Privilege
Version 8.3.17.0 Supported on M I/O Aggregator
Figure 5-9. show environment all Command Example
FTOS#show environment all
-- Unit Environment Status
Unit Status Temp
---------------------------------------------------------------------------
* 1 online 66C
* Management Unit
-- Thermal Sensor Readings (deg C)
Unit Sensor0 Sensor1
Sensor8 Sensor9
--------------------------------------------------------------------------------
----------------
1 51 51
66
FTOS#
Figure 5-10. show environment stack-unit Command Example
FTOS#show environment stack-unit
-- Unit Environment Status
Unit Status Temp
---------------------------------------------------------------------------
* 1 online 66C
* Management Unit
FTOS#
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter the keyword
information on a specific stack member. Range: 0 to 5.
(OPTIONAL) Enter the keyword
--
Voltage TempStatus
ok 2
--
Sensor2 Sensor3 Sensor4
63 61 61
--
Voltage TempStatus
ok 2
all
to view all components.
stack-unit
unit-id
followed by the
thermal-sensor
to view all components.
Sensor5 Sensor6
61 67 61
to display
Sensor7
64