Port Led State Indicators - Avaya VSP 4450GSX-PWR+ Installing

Installing the Avaya VSP 4000 4450GSX series
Label Color and Status
Green (blinking)
Amber (solid)
Amber (blinking)
Off

Port LED state indicators

This section describes the port LED state indicators by color and fluctuation cues.
Note:
Indicator states are applicable to all models of VSP 4000 switches.
The following list describes the three port LEDs:
• Activity indicates the level of activity on the link.
• Link indicates the presence of an Ethernet link.
• Speed indicates the port speed (for example, 10 Mb/s, 100 Mb/s, 1000 Mb/s).
Table 15: RJ-45 Port LED state indicators
Label
Speed/PoE+
Link / Activity
November 2016
Description
The switch is connected to a secondary power supply, but the
power input is disconnected.
The power supply in slot 1 or slot 2 was removed after
operating.
The power supply in slot 1 or slot 2 is present, but not supplying
power to the switch.
No power to secondary power supply. The switch is not
connected to an RPS or secondary power supply. The RPS is
not supplying power, or the DC/DC module is not supplying
power..
Color and Status
Green, Blink
Green, Steady
Amber, Blink
Amber, Steady
Amber, Green Pulse
Off
Green, Steady
Green, Blink
Green, Slow Blink
Off
Installing Avaya Virtual Services Platform 4450GSX-PWR+ Switch
Comments on this document? infodev@avaya.com
Description
The port is set to operate at 1000 Mbps with PoE.
The port is set to operate at 1000 Mbps without PoE
+.
The port is set to operate at 100 Mbps with PoE+.
The port is set to operate at 100 Mbps without PoE
+.
The port is experiencing a PoE+ error.
When the Link/Activity LED is green and the Speed
LED is off, the port is set to operate at 10 Mbps for
all models.
The link established but no data activity exists.
The link is established and data activity exists (the
blink rate indicates the level of activity).
The port is administratively disabled.
Local/remote fault.
36