Set Port Edge Admin State - Avaya 106760804 Command Reference Manual

set port edge admin state

Command Mode
Description
Syntax
Systems
Document No. 10-300090, Issue 1
Global Configuration.
Specifies whether a port is an edge port or a nonedge port. An edge port is
not connected to any other bridge. Only edge ports and point-to-point links
can rapidly transition to forwarding state.
If you set edge admin state to edge-port, the OperEdgePort field of the
show port command is also set to edge-port. However, if the port receives a
BPDU, the Oper Edge Port setting changes to non-edge-port. (To receive a
BPDU, the port must be connected to a bridge and thus is not an edge port.)
set port edge admin state <mod-swport-range>[...,<mod-swport-range>]
{edge-port | non-edge-port}
Table 21-13. Parameters, Keywords, Arguments
Name Definition
<mod-swport- The module and port or port range.
range>
edge-port Defines the port as an edge port.
non-edge port Defines the bridge as a nonedge port.
P580 and P882.
Port
21-15