Set System Location Command - Avaya P333R User Manual

Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".

set system location Command

The syntax for this command is:
set system location [location string]
Example:
Router-N> set system location "Floor 5,Room 12"
copy tftp startup-config Command
Use the copy tftp startup-config command to copy the P333R
configuration from the saved TFTP file to the Startup Configuration NVRAM.
The syntax for this command is:
copy tftp startup-config <filename> <ip>
filename
ip
Example:
copy tftp startup-config
copy running-config tftp Command
Use the copy running-config tftp command to copy the P333R
configuration from the current VRAM Running Configuration to the TFTP file.
The syntax for this command is:
copy running-config tftp <filename> <ip>
filename
ip
Avaya P333R User's Guide
Chapter 7
file name (full path)
The ip address of the host
c:\p333r\router1.cfg 192.168.49.10
file name (full path)
The ip address of the host
Cajun Campus CLI - Layer 3
153