Show Interfaces Switchport - Dell C9000 Series Reference Manual

PeGi 255/3/29
PeGi 255/3/30
PeGi 255/3/31
PeGi 255/3/32
PeGi 255/3/33
PeGi 255/3/34
PeGi 255/3/35
PeGi 255/3/36
PeGi 255/3/37
PeGi 255/3/38
PeGi 255/3/39
PeGi 255/3/40
PeGi 255/3/41
PeGi 255/3/42
PeGi 255/3/43
PeGi 255/3/44
PeGi 255/3/45
PeGi 255/3/46
PeGi 255/3/47
PeGi 255/3/48
Related
show interfaces
Commands
interface.

show interfaces switchport

Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2 mode
interfaces' IEEE 802.1Q tag status and VLAN membership.
C9000 Series
Syntax
show interfaces switchport [interface] [linecard slot-id]
Parameters
interface
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Down
Up
Down
Down
Up
Up
Up
Down
Up
Up
— displays information on a specific physical interface or virtual
(OPTIONAL) Enter one of the following keywords and slot/port
or number information:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port (ports or port-
range) information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port (ports or port-range)
information.
• Enter the keyword backup to view the backup interface for
this interface.
• For a port extender Gigabit Ethernet interface, enter the
keyword peGigE then the pe-id / stack-unit / port-id
information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id
range is from 1 to 48.
1000 Mbit Full --
1000 Mbit Full --
1000 Mbit Full --
1000 Mbit Full --
1000 Mbit Full --
1000 Mbit Full --
1000 Mbit Full --
1000 Mbit Full --
1000 Mbit Full --
1000 Mbit Full --
Auto Auto --
1000 Mbit Full --
Auto Auto --
Auto Auto --
1000 Mbit Full --
1000 Mbit Full --
1000 Mbit Full --
Auto Auto --
1000 Mbit Full 111
1000 Mbit Full 111
Interfaces 991