Show Ip Access-Lists - Dell PowerConnect 8024 Cli Reference Manual

Command Mode
Global Configuration mode
User Guidelines
Command fails if the new name is the same as the old one.
Example
The following example shows the mac access-list extended rename command.
console(config)#mac access-list extended rename DELL1 DELL2

show ip access-lists

Use the show ip access-lists command in Privileged EXEC mode to display access lists applied
on interfaces and all rules that are defined for the access lists.
Syntax
accesslistname
show ip access-lists
accesslistname — The name used to identify the ACL. The range is 1-31 characters.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays IP ACLs configured on a device.
console#show ip access-lists
Current number of ACLs: 2
ACL Name
------------------------------------------------------------------
ACL40
Maximum number of ACLs: 100
Rules Interface(s)
1
Vlan(s)
167
ACL Commands