Ip Telnet Server Enable - Dell PowerEdge M I/O Aggregator Reference Manual

ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Syntax ftp-server username username password [ encryption-type ] password
Parameters
username
password password
encryption-type
Defaults
Not enabled.
Command Modes
CONFIGURATION
Command
Version 8.3.17.0
History
hostname
Set the host name of the system.
Syntax hostname name
Parameters
name
Defaults FTOS
Command Modes
CONFIGURATION
Command
Version 8.3.17.0
History

ip telnet server enable

Enable the Telnet server on the switch.
Syntax ip telnet server enable
To disable the Telnet server, use the no ip telnet server enable command.
Defaults
Enabled
Command Modes
CONFIGURATION
Command
Version 8.3.17.0
History
Enter a text string up to 40 characters long as the user name.
password
Enter the keyword
the password.
Without specifying an encryption type, the password is unencrypted.
(OPTIONAL) After the keyword
numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for hidden text password.
Supported on M I/O Aggregator
Enter a text string, up to 32 characters long.
Supported on M I/O Aggregator
Supported on M I/O Aggregator
followed by a string up to 40 characters long as
password
enter one of the following
Control and Monitoring | 45