Table 5-50 Frequency Allowable Range And Preset Value - Agilent Technologies N9360A Programming Manual

N9360A Multi UE Tester GSM Programming Manual
The setting of this command and the setting of the
command described on
This query command returns the set channel number with
integer. The range of the value is same as that of the command
parameter.
Frequency
RFGenerator:FREQuency <int>
RFGenerator:FREQuency?
This command sets the frequency for each radio system set by
the Radio System command described on
allowable range and preset values are as follows:

Table 5-50 Frequency Allowable Range and Preset Value

RFORmat Allowable Range [Hz]
GSM850 869200000 to 893800000
GSM900 921200000 to 934800000,
935000000 to 959800000
DCS1800 1805200000 to 1879800000
PCS1900 1930200000 to 1989800000
The setting of this command and the setting of the
command described on
This query command returns the frequency with real. The range
of the value is same as that of the command parameter.
Amplitude
RFGenerator:AMPLitude <int>
RFGenerator:AMPLitude?
This command sets the output amplitude of RF Level. The
allowable range is from -110.0 to -20.0 (dBm) in 0.1 steps.
At preset, this is set to -50.0 (dBm).
This query command returns the set output amplitude with
real. The range of the value is same as that of the command
parameter.
Programming Command Reference
page 5-191 change synchronously.
page
Preset Value [Hz]
881200000
939000000
1842400000
1967400000
page 5-190 change synchronously.
5
Frequency
5-190. The
RFCH
5-191