N O T E
Command Reference for Configuration: Test Condition (BA) Screen
N9360A Multi UE Tester GSM Programming Manual
For Signal Generator function, attenuation settings for output signal are
applied.
BA Table
DISPlay:CONFigure:CONDition:BA
This command selects the [CONFIGURATION:Test Setup(Test
Condition(BA Table) )] screen.
BA Table Multiband Reporting
CONFigure:CONDition:BA:MREPorting <int>
CONFigure:CONDition:BA:MREPorting?
This command sets the Multiband Reporting. The allowable
range is from 0 to 3 in 1 steps. At preset, this is set to 3.
This query command returns the Multiband Reporting.
BA Table Neighbour Cell Channel
CONFigure:CONDition:BA:TABLe <int>, <enum>
CONFigure:CONDition:BA:TABLe?
This command selects the Channel of Neighbor Cell in BA Table.
Table 5-15 Neighbour Cell Channel Parameter and Preset Value
RFORmat
Parameter
int
GSM850
1 to 16
GSM900
1 to 16
DCS1800
1 to 16
PCS1900
1 to 16
Programming Command Reference
enum
OFF | BCCH | 128 to 251
OFF | BCCH | 955 to 1023 | 0
to 124
OFF | BCCH | 512 to 885
OFF | BCCH | 512 to 810
5
PRESET value
int
enum
1
BCCH
1
BCCH
1
BCCH
1
BCCH
5-79