Agilent Technologies N9360A Programming Manual page 251

N9360A Multi UE Tester GSM Programming Manual
8-PSK
• 8PSK:PN9
8PSK modulation with PN9 data.
• 8PSK:PN15
8PSK modulation with PN15 data.
This query command returns the selected type of modulation
with string. The meaning of return value is same as that of the
command parameter.
RF Signal Output Mode
RFGenerator:RFOUtput ON|OFF|1|0
RFGenerator:RFOUtput?
This command selects RF Signal Output status. The parameter
is ON (1) or OFF (0). At preset, this is set to 0.
Change System
RFGenerator:SYSTem GSM|WCDMA|CDMA2000
RFGenerator:SYSTem?
This command causes switching to the specified system (GSM,
W-CDMA and CDMA2000).
Query of this command obtains the specified system in the
character string.
Programming Command Reference
5
5-193