Agilent Technologies N9360A Programming Manual page 111

N9360A Multi UE Tester GSM Programming Manual
Channel Attenuation for RF Output
CONFigure:SEQuence:LOSS:RFOUT:CHANnel1 <<
<real 1>,<real 2>,<real 3>,<real 4>
CONFigure:SEQuence:LOSS:RFOUT:CHANnel1?
CONFigure:SEQuence:LOSS:RFOUT:CHANnel2 <<
<real 1>,<real 2>,<real 3>,<real 4>
CONFigure:SEQuence:LOSS:RFOUT:CHANnel2?
CONFigure:SEQuence:LOSS:RFOUT:CHANnel3 <<
<real 1>,<real 2>,<real 3>,<real 4>
CONFigure:SEQuence:LOSS:RFOUT:CHANnel3?
CONFigure:SEQuence:LOSS:RFOUT:CHANnel4 <<
<real 1>,<real 2>,<real 3>,<real 4>
CONFigure:SEQuence:LOSS:RFOUT:CHANnel4?
CONFigure:SEQuence:LOSS:RFOUT:CHANnel5 <<
<real 1>,<real 2>,<real 3>,<real 4>
CONFigure:SEQuence:LOSS:RFOUT:CHANnel5?
CONFigure:SEQuence:LOSS:RFOUT:CHANnel6 <<
<real 1>,<real 2>,<real 3>,<real 4>
CONFigure:SEQuence:LOSS:RFOUT:CHANnel6?
These six commands set the RF output path losses at each
channel for the radio systems, GSM850, GSM900, DCS1800 and
PCS1900, respectively. The allowable range is from -9.9 to 9.9
dB in 0.1 steps. At preset, these are set to 0.0 dB.
These six query commands return the set of the RF output path
losses at each channel with real. The range of the values is same
as that of the command parameter. Each value is separated by a
comma.
Programming Command Reference
5
5-53