Agilent Technologies N9360A Programming Manual page 91

Programming Command Reference
5
Time
CONFigure:TIME <int HH>,<int MM>
CONFigure:TIME?
This command sets the time of the clock in the Tester. <int
HH> is hour within the range from 0 to 23 and <int MM> is
minutes within the range from 0 to 59.
This query command returns the time of the clock in the Tester
by <int HH> and <int MM>. The range of these values is same
as that of the command parameter.
Panel Key Control
CONFigure:PKEY UNLOCK|LOCK
CONFigure:PKEY?
This command sets the panel key control to UNLOCK or LOCK. At
preset, this is set to UNLOCK. If this is set to LOCK, only
Automatic Test and Configuration are available. In Automatic
Test, Radio System, BCCH and TCH (Talk) are locked and
cannot be changed.
This command is not identical to Lock System Panel of the System
commands. See Lock System Panel on page 5-5.
This query command returns the panel key control setting by
string of UNLOCK or LOCK.
Printer Control
CONFigure:PRINter PMG800|USBMemory
CONFigure:PRINter?
This command sets the output device of the Print Screen. The
choices are PMG800 and USB Memory. At preset, this is set to
USBMemory.PMG800. This query command returns the output
device of the Print Screen with strings.
Log Output
CONFigure:LOG:DEBUG:SAVE
This command saves the debugging log.
N9360A Multi UE Tester GSM Programming Manual 5-33