Agilent Technologies N9360A Programming Manual page 196

Programming Command Reference
5
N O T E
5-138
Signaling Result (GPRS/EGPRS mode)
TESTs:MANual:RESults:SIGNaling?
This query command returns the test results value <int>.
<int> is sum of the value of 3 bits as follows.
bit 0 (1): Attach
bit 1 (2): Attached
bit 2 (4): Connect
Each bit is set to 0 if the test is pass, or each bit is set to 1 if the
test is fail. The value in the parentheses is decimal value for
each bit. Refer to Setting and Querying the Registers
page 4-18.
If there are no test results, all bits are set to 1 and the value 511
is returned.
If the mode is set to GSM, this command is invalid.
TESTs:MANual:RESults:SIGNaling:EXPand?
This query command returns the test contents currently being
executed and system type with integer value of <int 1> and <
int 2>. Each value is separated by a comma
• <int 1> contains signaling result of manual test by sum of
the value of 3 bits ranging from 0 to 7 as follows
This query command returns test result with <int>, by sum of
the value of 3 bits as follow.
bit 0 (1): Attach
bit 1 (2): Attached
bit 2 (4): Connect
Each bit is set to 0 if the test passed, or each bit is set to 1 if the
test failed. The value in the parentheses is decimal value for
each bit. Refer to Setting and Querying the Registers
page 4-18.
If there are no test results, all bits are set to 1 and the value 511
is returned.
• <int 2> contains the system currently being executed. The
return value is 1 (W-CDMA), 0 (GSM) or 2 (CDMA2000).
N9360A Multi UE Tester GSM Programming Manual
on
on