Command Reference For Signaling Screens - Agilent Technologies N9360A Programming Manual

Programming Command Reference
5
Relaxed Time Mask
TESTs:MANual:RAMP:MASK:PCS NARRow|RELaxed
TESTs:MANual:RAMP:MASK:PCS?
TESTs:MANual:TXP:MASK:PCS NARRow|RELaxed
TESTs:MANual:TXP:MASK:PCS?
These commands set a template for the power ramp time mask
of PCS1900. The mode of this command is selected NARRow or
RELaxed. The "Narrow" is the normal condition. The RELaxed
is same as one of DCS1800. This query command returns the
time mask setting with string value of NARR or REL. This
command is available for GSM only.

Command Reference for Signaling Screens

These commands are used to set the controls and parameters
associated with an initial test condition.
Location Update
TESTs:MANual:LOCupdate
This command executes a Location update procedure to the
mobile phone from the Tester.
BS Call
TESTs:MANual:BSCall
This command executes a call setup to the mobile phone from
the Tester.
BS Release
TESTs:MANual:BSRelease
This command releases the call from the Tester.
N9360A Multi UE Tester GSM Programming Manual 5-129