Command Reference For Configuration: Test Sequence Screen - Agilent Technologies N9360A Programming Manual

Programming Command Reference
5

Command Reference for Configuration: Test Sequence Screen

5-34
The Sequence commands are used to control the test flow and
test sequences of Automatic Test, and also to specify whether to
execute the pass or fail tests for the specified six measurement
channels. The query commands return the settings of those
controls and parameters.
Radio System
CONFigure:SEQuence:RFORmat <<
W-CDMA|GSM850|GSM900|DCS1800|PCS1900|CDMA2000MC1
X|CDMA2000EVDO|OFF
CONFigure:SEQuence:RFORmat?
This command selects a Radio System to be tested. The
parameter is W-CDMA, GSM850, GSM900, DCS1800, PCS1900,
CDMA2000MC1X, CDMA2000EVDO or OFF. At preset, this is set to
GSM900.
W-CDMA is available when the W00 option is installed.
CDMA2000MC1X is available when the C00 and C01 options are
installed.
CDMA2000EVDO is available when both the C00, C01 and C02
options are installed.
This query command returns the selected Radio System with
strings.
Sequence Number
CONFigure:SEQuence:NO 1|2
CONFigure:SEQuence:NO?
This command selects a Sequence Number. The sequence
number selected here applies to the commands that relate to
sequence. The default value is 1.
This query command returns the selected Sequence Number
with integer value of 1 or 2.
N9360A Multi UE Tester GSM Programming Manual