Agilent Technologies N9360A Programming Manual page 188

Programming Command Reference
5
5-130
Handover to W-CDMA
TESTs:MANual:HANDover:WCDMA
This command implements the handover between the systems
from the GSM system to the W-CDMA system.
MS Answer
TESTs:MANual:MSAnswer
This command answers a call from the mobile phone.
Change System
TESTs:MANual:SYSTem
GSM|GPRS|EGPRS|WCDMA|HSDPA|MC1X|EVDO
TESTs:MANual:SYSTem?
This command causes switching to the specified mode
(GSM/GPRS/EGPRS, WCDMA/HSDPA, and MC-1x/1xEV-DO) It is
enabled in the standby status.
GSM and GPRS are available when the G00 option is installed,
and EGPRS is available when the G00 and G03 options are
installed. Likewise, the W00 and W06 options are required for
HSDPA, the C00 and C01 options are required for MC1, and the
C00, C01 and C02 options are required for EVDO.
Query of this command obtains the currently set mode in the
character string.
Signaling State (GSM mode)
TESTs:MANual:SIGNaling:STATe?
This query command returns the test step currently executed
for a test cycle for the GSM mode. The return value contains the
status in execution of 10 bits as follows.
bit 0 (1): MS Call/BS Call
bit 1 (2): Talk/RF Test
bit 2 (4): MS Release/BS Release
bit 3 (8): Time Out Error
N9360A Multi UE Tester GSM Programming Manual