Txanalyzer Subsystem; Command Reference For Stand-By/Measuring Screens; Table 5-42 Rfch Channel Number Allowable Range And Preset Value - Agilent Technologies N9360A Programming Manual

Programming Command Reference
5

TXANalyzer Subsystem

Command Reference for Stand-by/Measuring Screens

Table 5-42 RFCH Channel Number Allowable Range and Preset Value

5-166
These commands are used to set the controls and parameters
associated with the TX Analyzer mode.
Radio System
TXANalyzer:RFORmat GSM850|GSM900|DCS1800|PCS1900
TXANalyzer:RFORmat?
This command selects a Radio System to be tested. The
parameter is specified from GSM850, GSM900, DCS1800 and
PCS1900. At preset, this is set to GSM900.
This query command returns the selected Radio System with
strings.
RFCH
TXANalyzer:RFCH:CHANnel <int>
TXANalyzer:RFCH:CHANnel?
This command sets the channel number to be tested for each
radio system set by the
above. The allowable range and preset values are as follows:
RFORmat Allowable Range
GSM850 128 to 251
GSM900 955 to 1023, 0 to 124
DCS1800 512 to 885
PCS1900 512 to 810
The setting of this command and the setting of the
command described on
This query command returns the set channel number to be
tested with integer. The range of the value is same as that of the
command parameter.
Radio System command described
Preset Value
188
20
698
698
page 5-167 change synchronously.
N9360A Multi UE Tester GSM Programming Manual
Frequency