Agilent Technologies N9360A Programming Manual page 318

Sample Program
7
Table 7-7 Program Comments
Line Description
29: Starts the Phase Error/Frequency Error measurement.
30: Waits until the measurement is completed.
31: Queries the measurement result of Phase Error.
32: Displays the measurement value and Pass or Fail result of Phase Error RMS on the status field.
33: Displays the measurement value and Pass or Fail result of Phase Error Peak on the status field.
34: Queries the measurement result of Frequency Error.
35: Displays the measurement value and Pass or Fail result of Frequency Error on the status field.
38: Displays the [TX Analyzer : Stand-by] Screen on the Tester.
39: Displays "Complete" message on the status field.
7-18 N9360A Multi UE Tester GSM Programming Manual