Agilent Technologies N9360A Programming Manual page 195

N O T E
N9360A Multi UE Tester GSM Programming Manual
TESTs:MANual:RESults:SIGNaling:EXPand?
This query command returns the test contents currently being
executed and system type with integer value of <int 1> and <
int 2>. Each value is separated by a comma
• <int 1> contains signaling result of manual test by sum of
the value of 9 bits ranging from 0 to 511 as follows:
bit 0 (1): Location Update
bit 1 (2): MS Call
bit 2 (4): MS Release
bit 3 (8): BS Call
bit 4 (16): NA
bit 5 (32): BS Release
bit 6 (64): Connection
bit 7 (128): NA
bit 8 (256): Handover
Each bit is set to 0 if the test passed, or each bit is set to 1 if the
test failed. The value in the parentheses is decimal value for
each bit. Refer to Setting and Querying the Registers
page 4-18.
If there are no test results, all bits are set to 1 and the value 511
is returned.
• <int 2> contains the system currently being executed. The
return value is 1 (W-CDMA), 0 (GSM) or 2 (CDMA2000).
If the mode is set to GSM/EGPRS, this command is invalid.
Programming Command Reference
on
5
5-137