Agilent Technologies N9360A Programming Manual page 117

Programming Command Reference
5
Radio System
CONFigure:CONDition:RFORmat
GSM850|GSM900|DCS1800|PCS1900
CONFigure:CONDition:RFORmat?
This command selects a Radio System to be tested. The
parameter is specified from GSM850, GSM900, DCS1800 and
PCS1900. At preset, this is set to GSM900.
This query command returns the selected radio system with
strings.
Network Configuration
MCC (Mobile Country Code)
CONFigure:CONDition:NETWork:MCC <int>
CONFigure:CONDition:NETWork:MCC?
This command sets the Mobile Country Code (MCC). The
allowable range is from 0 to 999. At preset, this is set to 1.
This query command returns the set Mobile Country Code with
integer. The range of the value is same as that of the command
parameter.
MNC (Mobile Network Code)
CONFigure:CONDition:NETWork:MNC <int>
CONFigure:CONDition:NETWork:MNC?
This command sets the Mobile Network Code (MNC). The
allowable range is from 0 to 99. At preset, this is set to 1.
This query command returns the set Mobile Network Code with
integer. The range of the value is same as that of the command
parameter.
N9360A Multi UE Tester GSM Programming Manual 5-59