Programming Command Summary
6
IEEE Common Commands
Top Menu Commands
Table 6-2 Top Menu Command Summary
Item
System Error
Lock System Panel
Current Screen
Top Menu Screen
System Configuration
Application Type
GSM Application
6-2
The following commands are used to control and query the
status of the Tester.
Table 6-1 IEEE Common Command Summary
Item
Event Status Register Query
Identification Query
Reset the Tester
Operation Complete
Clear Status
Standard Event Status Enable
Status Byte Register Query
Instrument Option Query
Selftest Result Query
The following commands are used for setting on the [Top Menu]
screen, the [Configuration] screen, [Firmware Update] screen
and, [Update Flash] screen.
Command
SYST:ERR?
SYST:KLOC ON|OFF|1|0
SYST:KLOC?
DISP?
DISP:INIT
DISP:CONF
DISP:APPL
APPL:GSM
Command
*ESR?
*IDN?
*RST
*OPC
*OPC?
*CLS
*ESE <int>
*ESE?
*STB?
*OPT?
*TST?
N9360A Multi UE Tester GSM Programming Manual