Agilent Technologies N9360A Programming Manual page 112

Programming Command Reference
5
5-54
Location Update
CONFigure:SEQuence:SIGNaling:LOCUpdate
OFF|LU1|LU2
CONFigure:SEQuence:SIGNaling:LOCUpdate?
This command sets whether to execute the Location Update test
in the test flow step. Selecting LU1 executes the Mobile Phone
Power On Location Update, LU2 executes the BS Change
Location Update and OFF (—) skips Location Update test. At
preset, this is set to LU1 in sequence1, and LU2 in sequence2.
1st Call Type
CONFigure:SEQuence:SIGNaling:CALL1:TYPE MS|BS
CONFigure:SEQuence:SIGNaling:CALL1:TYPE?
This command sets the first caller at the second step in the test
flow. The parameter is MS or BS. At preset, this is set to MS.
This query command returns the set of first caller by string of
MS or BS. The meaning of the return value is same as that of the
command parameter.
1st Call Test
CONFigure:SEQuence:SIGNaling:CALL1 ON|OFF|1|0
CONFigure:SEQuence:SIGNaling:CALL1?
This command sets whether to include the first call test in a test
flow. This parameter is ON (1) for Run or OFF (0) for — (skip). At
preset, this is set to 1.
This query command returns the set of first call test by integer
value of 1 or 0. The meaning of the return value is same as that
of the command parameter.
N9360A Multi UE Tester GSM Programming Manual