Table 5-47 Spectrum Monitor Measurement Result - Agilent Technologies N9360A Programming Manual

Programming Command Reference
5

Table 5-47 Spectrum Monitor Measurement Result

Value Definition
<string 2> Absolute peak RF frequency [Hz] 824200000 to 859200000,
<real 3> Absolute peak RF level [dBm]
<real 4> Relative RF level [dB]
<real 5> Relative RF level [dB]
<real 6> Relative RF level [dB]
5-188
• <int 1> (1 digit) is 0 if measurement results are within the
measurement range, or 1 if any measurement result is out of
range or the Spectrum Monitor is not measured.
•
The definitions and ranges of <int 2> (10 digits), <real
3> (5 letters), <real 4> (5 letters), and <real 5> (5
letters) are shown in the table below. If any measurement
result is out of range or the Spectrum Monitor is not
measured, the values 9999999999 for <int 2> and -99.9
for <real 3>, <real 4> and <real 5> are returned.
If ±100 kHz span is selected by the
described on page
of test result values <int 1>, <string 2>, <real 3>,
<real 4>, <real 5> and <real 6>. Each value is
separated by a comma.
• <int 1> (1 digit) is 0 if measurement results are within the
measurement range, or 1 if any measurement result is out of
range or the Spectrum Monitor is not measured.
The definitions and ranges of <int 2> (10 digits), <real
3> (5 digits), <real 4> (5 letters), <real 5> (5 letters) and
<real 6> (5 letters) are shown in the table below. If any
measurement result out of range or the Spectrum Monitor is
not measured, the values 9999999999 for <int 2> and
-99.9 for <real 3>, <real 4> <real 5> (5 letters) and
<real 6> are returned.
Range: Span 0 to 400 kHz
876200000 to 915200000,
1710200000 to 1785200000,
1850200000 to 1910200000
–99.9 to 99.9
–99.9 to 0.0 (at +200 kHz)
–99.9 to 0.0 (at +250 kHz)
<not applicable>
Display Span
5-187, this query command returns a set
Range: Span ±100 kHz
824100000 to 848900000, 876100000 to
914900000, 1710100000 to 1784900000,
1850100000 to 1909900000
–99.9 to 99.9
–99.9 to 0.0 (close to +67.7 kHz)
–99.9 to 0.0 (close to 0 kHz)
–99.9 to 0.0 (close to –67.7 kHz)
N9360A Multi UE Tester GSM Programming Manual
command