N O T E
N O T E
N9360A Multi UE Tester GSM Programming Manual
SRB Loopback BER(EGPRS mode, Test Mode SRB)
CONFigure:CONDition:LIMit:SRB <real HI>
CONFigure:CONDition:LIMit:SRB?
These commands set the high limit for Bit Error Ratio (BER).
The allowable range is from 0.00 to 99.99 (%) in 0.01 steps. At
preset, this is set to 2.44 in Class IB and ClassII, and this is set
to 0.12 in Fast BER, BER, and SBR Loopback BER
These query commands return the set high limit for BER test
with real. The range is same as that of the command parameter.
The above commands are valid only for corresponding mode setting
(GSM, GPRS and EGPRS).
FER (GSM Mode, Test Mode A) Limit
CONFigure:CONDition:LIMit:FER <real HI>
CONFigure:CONDition:LIMit:FER?
This command sets the high limit for Frame Error Ratio (FER)
test. The allowable range is from 0.00 to 99.99 (%) in 0.01
steps. At preset, this is set to 0.12.
This query command returns the set high limit for FER test with
real. The range is same as that of the command parameter.
If the GSM mode is set to GPRS or EGPRS in Manual Test mode,
measurement cannot be executed.
Programming Command Reference
5
5-73