Agilent Technologies N9360A Programming Manual page 141

N9360A Multi UE Tester GSM Programming Manual
List Files
CONFigure:FILE:LIST?
This query command returns a list of all setup files in the HDD
or a USB memory device. The return format is <int total>,
<int filenumber_1>, <string filename_1>, <string
date_1>, <string time_1>, <string comment_1>, ... ,
<int filenumber_n>, <string filename_n>, <string
date_n>, <string time_n>, and <string commnet_n>.
Each value is separated by a comma.
• <int total> (3 letters) is the total number of setup files in
the HDD or a USB memory device ranging from 000 to 100.
• <int filenumber_n> (3 letters) is the
ranging from 001 to 100.
• <string filename_n> (8 letters) is the file name of the
n
-th file.
• <string date_n> (10 letters) is the date in yyyy/mm/dd
format of the n -th file.
• <string time_n> (5 letters) is the time in hh:mm format
n
stored in the -th file.
• <string comment_n> (23 letters) is the comment of the
n
-th file.
where n ranges from 1 to the last number of the files (total) in
the HDD or a USB memory device.
Replace File
CONFigure:FILE:REPlace
This command is used when duplicating the procedure file
between HDD and USB. The device returned in response to the
Device Control on page 5-82
File List Short
CONFigure:FILE:LIST:SHOrt?
This query command returns a list of all setup files. The return
format is <string TOTAL>, <string FILENO1>, <string
FILENAME1>, ...<string FILENOn> and <string
FILENAMEn>. The FILENAME is double quoted strings.
Programming Command Reference
n
-th file number
indicates the source device.
5
5-83