Agilent Technologies N9360A Programming Manual page 118

Programming Command Reference
5
5-60
NCC (Network Color Code)
CONFigure:CONDition:NETWork:NCC <int>
CONFigure:CONDition:NETWork:NCC?
This command sets the Network Color Code (NCC). The
allowable range is from 0 to 7. At preset, this is set to 1.
This query command returns the set Network Color Code with
integer. The range of the value is same as that of the command
parameter.
LAC (Location Area Code)
CONFigure:CONDition:NETWork:LAC <int>
CONFigure:CONDition:NETWork:LAC?
This command sets the Location Area Code (LAC). The
allowable range is from 0 to 65535. At preset, this is set to 1.
This query command returns the set Location Area Code with
integer. The range of the value is same as that of the command
parameter.
BS-PA (Number of Multiframes)
CONFigure:CONDition:NETWork:BSPA <int>
CONFigure:CONDition:NETWork:BSPA?
This command sets the number of multiframes
(BS_PA_MFRMS) between two transmissions. The allowable
range is from 2 to 9. At preset, this is set to 2.
This query command returns the set number of multiframes
with integer. The range of the value is same as that of the
command parameter.
N9360A Multi UE Tester GSM Programming Manual