Initial Softkey Screen Commands; Configuration Screen Commands - Agilent Technologies N9360A Programming Manual

Initial Softkey Screen Commands

Configuration Screen Commands

N9360A Multi UE Tester GSM Programming Manual
Mode Select
INITialsoftkey:MODe FUNC
INITialsoftkey:MODe?
This command selects the Tester Mode.
This query command returns the Tester Mode with strings.
Printer Control
CONFigure:PRINter PMG800|USBMemory
CONFigure:PRINter?
This command sets the output direction of the Print Screen. The
choices are PMG800 and USBMemory. At preset, this is set to
USBMemory. This query command returns the output direction
of the Print Screen with strings.
Beeper Control
CONFigure:BEEPer ON|OFF|1|0
CONFigure:BEEPer?
This command sets the beep function to ON (1) or OFF (0). If this
is set to ON, there is beep for each step of operation. If this is set
to OFF, beep is suppressed except for some errors and warnings.
At preset, this is set to 1. This query command returns the beep
setting with integer value of 1 or 0.
Programming Command Reference
5
5-9