Agilent Technologies N9360A Programming Manual page 232

Programming Command Reference
5
5-174
• <real 3> (up to 7 letters) shows the different results
responding to the mode and modulation.
• GSM/GPRS/EGPRS (GSMK): <real 3> is the marker
position in bits ranging from -9.25 to 156.25 when the
zoom function is set to Off, or from -8.00 to 2.00 and
145.00 to 155.00 when the zoom function is set to On.
• EGPRS (8-PSK): <real 3> is the marker position in bits
ranging from 27.75 to 468.75 when the zoom function is
set to Off, or from -24.00 to 6.00 and 435.00 to
465.00 when the zoom function is set to On.
• <real 4> (up to 5 letters) is the measured power level at the
marker position. If measurement result is out of range or the
Power Ramp is not measured, the value -99.9 is returned.
Power Ramp Marker Position Control
TXANalyzer:RESults:RAMP:MARKer:POINt UP|DOWM
TXANalyzer:RESults:RAMP:MARKer:POINt <real>
TXANalyzer:RESults:RAMP:MARKer:POINt?
GSM/GPRS/EGPRS (MCS1-4): This command moves the marker
EGPRS (MCS5-9): This command moves the marker position UP
or DOWN in steps, or by <real> ranging from
-27.75 to 468.75 in bits when the zoom
function is set to Off, or from -24.00 to
6.00 and 435.00 to 465.00 when the zoom
function is set to On.
position UP or DOWN in steps, or
by <real> ranging from -9.25 to
156.25 in bits when the zoom
function is set to Off, or from
-8.00 to 2.00 and 145.00 to
155.00 when the zoom function is
set to On.
N9360A Multi UE Tester GSM Programming Manual