Command Reference For Signal Generator Screen; Command Reference For Configuration Screens - Agilent Technologies N9360A Programming Manual

Programming Command Reference
5

Command Reference for Signal Generator Screen

Command Reference for Configuration Screens

N O T E
5-28
RF Signal Generator
DISPlay:RFGenerator
This command selects the [Signal Generator] screen.
System Configuration
DISPlay:CONFigure
This command selects the [Configuration] screen. The
parameters and controls on this screen set the fundamental
information for all function modes of the Tester.
The parameters for the serial andGP-IB are manually specifiable.
The Ethernet parameters are specifiable in the program.
N9360A Multi UE Tester GSM Programming Manual