Agilent Technologies N9360A Programming Manual page 68

Programming Command Reference
5
5-10
10MHz Reference Oscillator
CONFigure:ROSCillator INT|EXT
CONFigure:ROSCillator?
This command sets the reference signal, INT for the internal
reference or EXT for the external reference signal. At preset,
this is set to INT.
This query command returns the reference signal setting with
string of INT or EXT.
When EXT is selected, an appropriate signal needs to be
supplied to the 10 MHz reference connector (IN) on the rear
panel of the Tester.
Date
CONFigure:DATE <int YYYY>,<int MM>,<int DD>
CONFigure:DATE?
This command sets the date of the calendar in the Tester. <int
YYYY> is year within the range from 1990 to 2037, <int MM>
is month within the range from 1 to 12, and <int DD> is day
within the range from 1 to 31.
This query command returns the date of the calendar in the
Tester with <int YYYY>, <int MM> and <int DD>. The range
of these values is same as that of the command parameter.
Time
CONFigure:TIME <int HH>,<int MM>
CONFigure:TIME?
This command sets the time of the clock in the Tester. <int
HH> is hour within the range from 0 to 23 and <int MM> is
minutes within the range from 0 to 59.
This query command returns the time of the clock in the Tester
with <int HH> and <int MM>. The range of these values is
same as that of the command parameter.
N9360A Multi UE Tester GSM Programming Manual