Command Reference For Tx Analyzer Screens - Agilent Technologies N9360A Programming Manual

Programming Command Reference
5
Output RF Spectrum (ORFS)
DISPlay:MANual:ORFS
This command selects the Manual Test [ORFS] screen.

Command Reference for TX Analyzer Screens

Stand-by
DISPlay:TXANalyzer:STBY
This command selects the TX Analyzer [Stand-by] screen.
Peak TX Power/Burst Timing/Power Ramp
DISPlay:TXANalyzer:TPOWer
This command selects the TX Analyzer [TX Power/Ramp]
screen.
Phase Error/Frequency Error
DISPlay:TXANalyzer:PHASe
This command selects the TX Analyzer [Phase Error/Frequency
Error] screen.
Spectrum Monitor
DISPlay:TXANalyzer:SMONitor
This command selects the TX Analyzer [Spectrum Monitor]
screen.
Output RF Spectrum (ORFS)
DISPlay: TXANalyzer:ORFS
This command selects the TX Analyzer [ORFS] screen.
N9360A Multi UE Tester GSM Programming Manual 5-27