File Management Screens; Network Setting Screens; Table 6-10 File Command Summary; Table 6-11 Network Command Summary - Agilent Technologies N9360A Programming Manual

Programming Command Summary
6

File Management Screens

Table 6-10 FILE Command Summary

Item
Save File
Recall File
Delete File
Device Control
List Files
Replace
File System

Network Setting Screens

Table 6-11 Network Command Summary

Item
Apply Address
IP Address
Default Gateway
6-18
The following commands are used to manage the test setup files
in the HDD and a USB memory device.
Command
CONF:FILE:SAVE <<
<FILENAME>,<COMMENT>
CONF:FILE:REC <filename>
CONF:FILE:DEL <filename>
CONF:FILE:DEV HDD|USB
CONF:FILE:DEV?
CONF:FILE:LIST?
CONF:FILE:REP
CONF:FILE:SYST GSM|WCDMA|MULTI
CONF:FILE:SYST?
Following commands are used to set the [Configuration:
NetworkSetting] screen-related control and parameters.
Command
CONF:NET:APPLY:ADDR
CONF:NET:IP <string IPADDRESS>,<int>
CONF:NET:IP?
CONF:NET:DEF:GATE <<
<enum>,<string DEFAULTGATEWAY>
CONF:NET:DEF:GATE?
N9360A Multi UE Tester GSM Programming Manual