System Subsystem; System Subsystem Command Reference - Agilent Technologies N9360A Programming Manual

SYSTem Subsystem

SYSTem Subsystem Command Reference

N9360A Multi UE Tester GSM Programming Manual
The SYSTem commands are used to control the overall system
function.
Lock System Panel
SYSTem:KLOCk ON|OFF|1|0
SYSTem:KLOCk?
This command selects lock functions of panel control for
protection. At preset, this is set to 0.
Setting 1 inactivates every function. When the command
SYSTem:KLOCk OFF is sent, the Tester returns to the normal
operation.
This command is not identical to the panel key lock on the
[Configuration] screen. See
This query command returns the selected lock function with
integer of 1 or 0. The meaning of the return value is same as
that of the command parameter.
Softkey Memory
SYSTem:MEMory:AMPLitude <real 1>,<real 2>,<real
3>,<real 4>
SYSTem:MEMory:AMPLitude?
SYSTem:MEMory:CHANnel <int 1>,<int 2>,<int
3>,<int 4>
SYSTem:MEMory:CHANnel?
These commands store four settings of Amplitude or Channel
into Memory 1, 2, 3 and 4. The stored values are displayed on
those softkeys.
These query commands return the stored values with real and
integer.
Programming Command Reference
Panel Key Control on
5
page 5-33.
5-195