Agilent Technologies N9360A Programming Manual page 87

Programming Command Reference
5
Test Condition
DISPlay:CONFigure:CONDition
This command selects the [Configuration: Test Condition]
screen. The parameters and controls on this screen set the test
conditions of Automatic Test and Manual Test.
DISPlay:CONFigure:CONDition:LOSS
This command selects the [Configuration: Test Condition
(Loss)] screen. The parameters and controls on this screen set
the test conditions of Automatic Test and Manual Test.
DISPlay:CONFigure:CONDition:LIMit
This command selects the [Configuration: Test Condition
(Linit)] screen. The parameters and controls on this screen set
the test conditions of Automatic Test and Manual Test.
DISPlay:CONFigure:CONDition:BA
This command selects the [CONFIGURATION:Test Setup(Test
Condition(BA Table) )] screen.
Test Sequence
DISPlay:CONFigure:SEQuence
This command selects the [Configuration : Test Sequence]
screen. The parameters and controls on this screen set the test
sequence of Automatic Test.
File Management
DISPlay:CONFigure:FILE
This command selects the [File Management] screen. The files
containing test setup files for all function modes are saved to
the HDD or a USB memory device. Also, these files are recalled
or deleted from the HDD or the USB memory device.
N9360A Multi UE Tester GSM Programming Manual 5-29