Agilent Technologies N9360A Programming Manual page 75

Programming Command Reference
5
Update History Request Number
UPDAte:HISTory:REQuest:NUMber <int>
UPDAte:HISTory:REQuest:NUMber?
This command set the read-out number of the update result
history read by UPDate:HISTory?. The allowable range is
from 1 to 58 in 1 steps. At preset, this is set to 10.
This query command returns the read-out number of the update
result history with integer. The range of this values is same as
that of the command parameter.
Update History Number
UPDAte:HISTory:NUMber?
This query command returns the total number of the existing
update history.
HDD Clear File
UPDAte:HDD:CLEar:FILE
This command carries out deletion of the archive files for the
HDD update. It is effective only when the Update Type is set to
HDD.
Server IP Address
UPDAte:SERver:IPaddress <string>
UPDAte:SERver:Ipaddress?
This command sets the IP address of ftp server for SERVER
update. <string> specifies the IP address, ranging from 0.0.0.0 to
223.255.255.255. At preset, this is set to 0.0.0.0.
This query command returns the IP address of ftp server for
SERVER update. The range of this values is same as that of the
command parameter.
N9360A Multi UE Tester GSM Programming Manual 5-17