Programming Command Reference
5
N O T E
N O T E
5-132
• <int 2> contains total results. The returned value is 0 (Test
result available: only passed items), 1 (Test result available:
including failed items) or 2 (None).
When GPRS/EGPRS mode is set, refer to
mode).
TESTs:MANual:SIGNaling:STATe:EXPand?
This query command returns test content and type currently
being executed with integer value of <int 1> and < int 2>.
Each value is separated by a comma.
• <int 1> contains test contents by sum of the value of 11 bits
as follows.
bit 0 (1): MS Call/ BS Call
bit 1 (2): Talk, RF Test
bit 2 (4): MS Release/BS Release
bit 3 (8): Time out error; currently unused
bit 4 (16): End; Stand-by status
bit 5 (32): Location Update
bit 6 (64): Busy
bit 7 (128): SMS-CB
bit 8 (256): SMS-MO
bit 9 (512): SMS-MT
bit 10 (1024): NA
The step in execution is set to 1, and the others are set to 0. The
value in the parentheses is decimal value for each bit. Refer to
Setting and Querying the Registers
<int 2> contains the system currently being executed. The
return value is 1 (W-CDMA), 0 (GSM) or 2 (CDMA2000).
When GPRS/EGPRS mode is set, refer to
mode)
Signaling State (GPRS/EGPRS
on
page
4-18.
Signaling State (GPRS/EGPRS
N9360A Multi UE Tester GSM Programming Manual